Blog

19 July 2023

New control unit EDU2AE/HPRO/TA

The new EDU2AE/HPRO/TA control unit capable of handling torque/angle parameters for the set program and with torque range 0.35-70 Nm is available.

KEEP READING

13 July 2023

K-Link 1.1 is now available

The newest version of our free K-Link software is now available and the software is now compatible with our entire K-DUCER line, including the MicroTorque KDU-NT, as well as with our entire PLUTO, MITO & NATO line, provided a EDU2AE (HPRO or higher) controller is used.



KEEP READING

11 July 2023

What is the main difference between a transducer screwdriver, a current-controlled screwdriver and a clutch screwdriver?

Anybody tasked with equipping an assembly line with torque electric screwdrivers will run into a few different technologies while researching their options. These include clutch screwdrivers, current-controlled screwdrivers and transducer screwdrivers.

KEEP READING

05 June 2023

New KDS-NT Screwdrivers for low torques

Our new KDS-NT transducerized screwdriver is the most intelligent and cost-effective tool on the market in the 5 - 70 cNm (i.e. 0.05 - 0.7Nm) torque range.

KEEP READING

05 May 2023

New K-DUCER NT screwdrivers for low torque

The new micro torque K-Ducer, the KDS-NT, is the latest addition to our transducerized screwdriver line and it's the most intelligent and cost-effective tool on the micro-torque market in the 5 - 70 cNm (i.e. 0.05 - 0.7Nm) torque range.

KEEP READING

[1]  <  6  7  8  9  10  11  12  >  [23]