Model | Code | Compatible tools | Description |
---|---|---|---|
ANG HD1 Drawings3D | 010100 | FAB & RAF | 90º Angle head for FAB Series, 1/4" hex output |
ANG HD2 Drawings3D | 010120 | FAB & RAF | 90° Angle head for RAF Series, 1/4"hex output |
ANG HD8 DrawingsDrawings3D | 010143 | FAB & RAF | Heavy duty 90º angle head for FAB Series, 1/4" hex output |
ANG HD9 DrawingsDrawings3D | 010144 | FAB & RAF | Heavy duty 90° angle head for RAF Series, 1/4"hex output |
Model | Code | Compatible tools | Description |
---|---|---|---|
Lock-out cover | 219012 | FAB & RAF | Lock-out cover with adjustment key for FAB. A lock-out cover locks the screwdriver's clutch in order to avoid any accidental torque change. |
Model | Code | Compatible tools | Description |
---|---|---|---|
ARM PV1 Drawings | 010500 | FAB & RAF, KBL, PLUTO | ARM PV1 support arm consists of a vertical support on which a 180° pivoting arm is attached. |
TECBA1 Drawings | 010300 | FAB & RAF, KBL, PLUTO | TECBA1 tool balancers allow screwdrivers to be positioned over the workstation for maximum operator comfort. 1 - 2.2 lb capacity. |
TECBA2 | 010312 | PLUTO | TECBA2 tool balancers allow screwdrivers to be positioned over the workstation for maximum operator comfort. 2.2 - 4.4 lb capacity. |
TECBA3 | 010313 | PLUTO | TECBA3 tool balancers allow screwdrivers to be positioned over the workstation for maximum operator comfort. 4.4 - 6.6 lb capacity. |
Pistol FAB, RAF, KBL and PLUTO wall support | 010175 | FAB & RAF, PLUTO, KBL | Wall supports for pistol screwdrivers can be fixed to a vertical surface to easily store FAB, RAF, PLUTO and KBL pistol tools when not in use. |
Wall support for angle RAF and PLUTO | 010176 | RAF, PLUTO | Wall supports can be fixed to a vertical surface to easily store RAF and PLUTO tools with angle head when not in use. |
Diametre adaptor | 234545 | PLUTO | Reduction adaptor for PLUTO35 & 50CA drivers allowing interface with LINAR and CAR series arms |
UR-Mount | 010695/UR | PLUTO | Tool holder for PLUTO3, 6, 10 & 15CA and CA/FN2 series drivers. To be attached to Universal Robots® robotic arm. |
Wall mount tilting bracket for KDU | 010401 | KDU | Wall mount tilting bracket for KDU for wall or column use |
Pivoting table stand for KDU | 010402 | KDU | Pivoting table stand for KDU for table use, tiltable |
Model | Code | Compatible tools | Description |
---|---|---|---|
8.2 ft | 200063 | FAB & RAF, KBL, NATO, MITO, PLUTO | Standard 5 pin cable − included with screwdriver |
8.2 ft | 200063/H | FAB & RAF, KBL, NATO, MITO, PLUTO | 5 pin cable with strain relief − heavy duty applications |
16.4 ft | 200563 | FAB & RAF, KBL, NATO, MITO, PLUTO | 5 pin cable, 16 ft length |
16.4 ft | 200563/S | FAB & RAF, KBL, NATO, MITO, PLUTO | 5 pin spiral cable |
26.2 ft | 200863 | FAB & RAF, KBL, NATO, MITO, PLUTO | 5 pin cable, 26 ft length |
8.2 ft | 250063/N | KBL/S, PLUTO/TA, NATO/TA, MITO /TA | Standard 8 pin cable − included with screwdriver |
8.2 ft | 250063/H | KBL/S, PLUTO/TA, NATO/TA, MITO /TA | 8 pin cable with strain relief − heavy duty applications |
16.4 ft | 250563 | KBL/S, PLUTO/TA, NATO/TA, MITO /TA | 8 pin cable, 16 ft length |
16.4 ft | 250563/S | KBL/S, PLUTO/TA, NATO/TA, MITO /TA | 8 pin spiral cable |
Model | Code | Compatible tools | Description |
---|---|---|---|
Clutch cover for KBL04-15 | 020028 | KBL | Model for KBL04FR and KBL15FR. It prevents the operator from accidentally altering the clutch adjustment. |
Clutch cover for KBL30-40 | 020029 | KBL | Model for KBL30FR and KBL40FR. It prevents the operator from accidentally altering the clutch adjustment. |
Clutch cover for KBL04-15 CA | 020028/CA | KBL | Model for KBL04FR/CA and KBL15FR/CA. It prevents the operator from accidentally altering the clutch adjustment. |
Clutch cover for KBL30-40 CA | 020029/CA | KBL | Model for KBL30FR/CA and KBL40FR/CA. It prevents the operator from accidentally altering the clutch adjustment. |
Model | Code | Compatible tools | Description |
---|---|---|---|
RIV HD2 | 010181 | KBL | 0.31 in hole. Model for KBL30FR and KBL04FR screwdrivers, also for models with signals (KBL FR/S) and autoreverse (KBL FR/AR). |
RIV HD4 | 010183 | KBL | 0.11 in hole. Model for KBL04FR and KBL15FR screwdrivers, also for models with signals (KBL FR/S) and autoreverse (KBL FR/AR). |
RIV HD5 | 010184 | KBL | 0.11 in hole. Model for KBL30FR and KBL04FR screwdrivers, also for models with signals (KBL FR/S) and autoreverse (KBL FR/AR). |
RIV HD1 | 010180 | PLUTO | 0.31 in hole. Model for PLUTO3D, PLUTO6D, PLUTO10D/N, PLUTO15D/N. |
RIV HD3 | 010182 | PLUTO | 0.11 in hole. The 0.11 in hole can be modified up to 0.4 in. Model for PLUTO3D, PLUTO6D, PLUTO10D/N, PLUTO15D/N. |
Model | Code | Compatible tools | Description |
---|---|---|---|
1/4" - 1/4" kit for 04-15 | 800406 | KBL | 1/4" - 1/4" flange mount kit that turns KBL04 CA and KBL15 CA screwdrivers into KBL CA/FN. |
1/4" - 1/4" kit for 30-40 | 800407 | KBL | 1/4" - 1/4" flange mount kit that turns KBL30 CA and KBL40 CA screwdrivers into KBL CA/FN. |
1/4" - 3/8" kit | 800400 | PLUTO | An 1/4" - 3/8" flange mount kit turns a PLUTO (3, 6, 10 or 15) CA into PLUTO CA/FN2. |
3/8" - 3/8" kit | 800401 | PLUTO | For PLUTO20. It turns a PLUTO20CA into PLUTO20CA/FN. |
3/8" - 3/8" kit | 800403 | PLUTO | For PLUTO35. It turns a PLUTO35CA into PLUTO35CA/FN. |
Model | Code | Compatible tools | Description |
---|---|---|---|
1/2" - 1/2" | 800319 | PLUTO | Model for PLUTO 50/FN. Max 442 in-lb. |
1/4" - 3/8" | 800320 | PLUTO | Model for PLUTO CA/FN2. Max 133 in-lb. |
3/8" - 3/8" | 800321 | PLUTO | Model for PLUTO20 and PLUTO35. Max 310 in-lb. |
1/4" - 1/4" | 800322 | KBL, MITO | Model for PLUTO FR/FN and MITO /FN. Max 62 in-lb. |
Model | Code | Compatible tools | Description |
---|---|---|---|
A2 Drawings | 010111/1 | KBL, NATO, MITO, PLUTO | For non-magnetic M2-M2.6 screws. It can be installed on any screwdriver. |
A3 | 010111/2 | KBL, NATO, MITO, PLUTO | For non-magnetic M3-M4 screws. It can be installed on any screwdriver. |
ASP HD6 | 010117 | NATO, MITO | Rubber pad output. Best suited for round-headed screws. Model specifically designed for NATO15. |
ASP HD6/UNI | 010117/UNI | NATO, MITO | Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for NATO15. |
ASP HD7 | 010118 | NATO, MITO | Rubber pad output. Best suited for round-headed screws. Model specifically designed for NATO50. |
ASP HD7/UNI | 010118/UNI | NATO, MITO | Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for NATO50. |
ASP HD8 | 010119 | NATO, MITO | Rubber pad output. Best suited for round-headed screws. Model specifically designed for MITO15. |
ASP HD8/UNI | 010119/UNI | NATO, MITO | Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for MITO15. |
ASP HD9 | 010121 | PLUTO | Rubber pad output. Best suited for round-headed screws. Model specifically designed for PLUTO3, PLUTO6, PLUTO10 and PLUTO15. |
ASP HD9/UNI | 010121/UNI | PLUTO | Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for PLUTO3, PLUTO6, PLUTO10 and PLUTO15. |
ASP HD10 | 010122 | KBL | Rubber pad output. Best suited for round-headed screws. Model specifically designed for KBL04 and KBL15. |
ASP HD10/UNI | 010122/UNI | KBL | Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for KBL04 and KBL15. |
ASP HD11 | 010123 | KBL | Rubber pad output. Best suited for round-headed screws. Model specifically designed for KBL30 and KBL40. |
ASP HD11/UNI | 010123/UNI | KBL | Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for KBL30 and KBL40. |
Model | Code | Compatible tools | Description |
---|---|---|---|
AC 2.3 | 010113 | KBL, NATO, MITO, PLUTO | For M2-M3 screws. Easily picks up non-magnetic screws with a small plastic clamp. |
AC 3.5 | 010114 | KBL, NATO, MITO, PLUTO | For M3-M5 screws. Easily picks up non-magnetic screws with a small plastic clamp. |
Model | Code | Compatible tools | Description |
---|---|---|---|
DOCK 01 Drawings | 020020 | EDU1FR | Dual output connector for EDU1FR controllers. Run two drivers with one controller. Drivers cannot be used at the same time. |
DOCK 02 Drawings | 020035 | EDU1BL | Dual output connector for EDU1BL controllers. Run two drivers with one controller. Both drivers can be used at the same time. |
DOCK 02/S Drawings | 020035/S | EDU1BL/SG | Dual output connector for EDU1BL/SG controllers. Run two drivers with one controller. Drivers cannot be used at the same time. |
DOCK 04 DrawingsDrawings | 020045 | EDU2AE/TOP | Dual output connector for PLUTO Series, to be used with EDU2AE/TOP. Run two drivers with one controller (not simultaneously). |
DOCK 04/TA/N | 020045/TA/N | EDU2AE/TOP/TA | Dual output connector for PLUTO TA Series, to be used with EDU2AE/TOP/TA. Run two drivers with one controller (not simultaneously). |
DOCK 05 | 020046 | KDU | Dual output connector for KDS screwdrivers, to be used with KDU units. Run two drivers with one controller (not simultaneously). |
ACE Drawings | 020021 | EDU1FR/SG, EDU1BL/SG | Screw counting device for EDU1FR/SG controller. It keeps track of either correct and wrong tightenings, as well as cycles and sequences. |
Ethernet device DrawingsDrawings | 020075 | EDU2AE/TOP, EDU2AE/TOP/E o EDU2AE/TOP/TA (multitorque controllers) | Connect your PC to any EDU2AE/TOP, EDU2AE/TOP/E or EDU2AE/TOP/TA via remote LAN connection using an ethernet device. |
UR® Robot connection device | 020077 | EDU2AE/TOP, EDU2AE/TOP/E o EDU2AE/TOP/TA (multitorque controllers) | Plug-in device for connecting UR® Robot and EDU2AE/TOP, EDU2AE/TOP/E or EDU2AE/TOP/TA controllers. |
UR® Robot connection device | 020078 | KDU | Plug-in device for connecting UR® Robot and KDU controllers. |
2D Barcode reader | 020051 | KDU | KDU units can also be controlled via a barcode reader. Scan the right barcode (either 1D or 2D, such as QR codes) to select the correct program. |
Adaptor kit SW CBS | 010410 | KDU | Adaptor device for connecting KDU-1A and SWBX88 switchbox or CBS880 socket tray. |
Programming device KDU | 010420 | KDU | Programming device for firmware updates on KDU-1A control units. Cable code no. 872538 included. |
Cable for PICkit4 | 872538 | KDU | Interface cable between PICkit4 programming device and KDU-1A control unit. |
SWBX88 Switchbox Drawings | 020033 | EDU2AE/TOP, EDU2AE/TOP/E o EDU2AE/TOP/TA (multitorque controllers) | Select the right pre-set program by simply pushing a button. 8-program selection. |
CBS880 Socket tray | 020042 | EDU2AE/TOP, EDU2AE/TOP/E o EDU2AE/TOP/TA (multitorque controllers) | When a bit or socket is removed from the tray, the control unit automatically selects the pre-set program. 8-program selection. |
BRCR90 Barcode reader | 020050 | EDU2AE/TOP, EDU2AE/TOP/E o EDU2AE/TOP/TA (multitorque controllers) | Multiprogram units can also be controlled via a barcode scanner. Scan the right barcode to select the correct pre-set program. |
Model | Code | Compatible tools | Description |
---|---|---|---|
Start / Reverse pedals | 020070 | EDU2AE | Start and reverse signals can be activated using a foot pedal. Supplied standard with 11 ft cable and connector for any EDU2AE controller. |
Model | Code | Compatible tools | Description |
---|---|---|---|
PRNTR1 Serial printer | 020026 | K, Mini K Torque testers | Instantly print each screw tightening result via a serial printer. It connects directly to multiprogram units and K and Mini K/S torque testers. |
Model | Code | Compatible tools | Description |
---|---|---|---|
Light tower stack | 020080 | EDU2AE | A light stack makes output signals clearly visible. Supplied standard with 8 ft cable and 10 pin connector for EDU2AE series. |
Light tower stack | 020081 | EDU2AE/TOP, EDU2AE/TOP/TA | A light stack makes output signals clearly visible. Supplied standard with 8 ft cable and 10 pin connector for EDU2AE/TOP and TOP/TA. |
Light tower stack | 020083 | KDU | A light stack makes output signals clearly visible. Supplied standard with a 8 ft cable and 10 pin connector for KDU. |
Model: ANG HD1 Drawings Drawings 3D |
---|
Code: 010100 |
Compatible tools: FAB & RAF |
Description: 90º Angle head for FAB Series, 1/4" hex output |
Model: ANG HD2 Drawings Drawings 3D |
---|
Code: 010120 |
Compatible tools: FAB & RAF |
Description: 90° Angle head for RAF Series, 1/4"hex output |
Model: ANG HD8 Drawings Drawings 3D |
---|
Code: 010143 |
Compatible tools: FAB & RAF |
Description: Heavy duty 90º angle head for FAB Series, 1/4" hex output |
Model: ANG HD9 Drawings Drawings 3D |
---|
Code: 010144 |
Compatible tools: FAB & RAF |
Description: Heavy duty 90° angle head for RAF Series, 1/4"hex output |
Model: Lock-out cover |
---|
Code: 219012 |
Compatible tools: FAB & RAF |
Description: Lock-out cover with adjustment key for FAB. A lock-out cover locks the screwdriver's clutch in order to avoid any accidental torque change. |
Model: ARM PV1 Drawings |
---|
Code: 010500 |
Compatible tools: FAB & RAF, KBL, PLUTO |
Description: ARM PV1 support arm consists of a vertical support on which a 180° pivoting arm is attached. |
Model: TECBA1 Drawings |
---|
Code: 010300 |
Compatible tools: FAB & RAF, KBL, PLUTO |
Description: TECBA1 tool balancers allow screwdrivers to be positioned over the workstation for maximum operator comfort. 1 - 2.2 lb capacity. |
Model: TECBA2 |
---|
Code: 010312 |
Compatible tools: PLUTO |
Description: TECBA2 tool balancers allow screwdrivers to be positioned over the workstation for maximum operator comfort. 2.2 - 4.4 lb capacity. |
Model: TECBA3 |
---|
Code: 010313 |
Compatible tools: PLUTO |
Description: TECBA3 tool balancers allow screwdrivers to be positioned over the workstation for maximum operator comfort. 4.4 - 6.6 lb capacity. |
Model: Pistol FAB, RAF, KBL and PLUTO wall support |
---|
Code: 010175 |
Compatible tools: FAB & RAF, PLUTO, KBL |
Description: Wall supports for pistol screwdrivers can be fixed to a vertical surface to easily store FAB, RAF, PLUTO and KBL pistol tools when not in use. |
Model: Wall support for angle RAF and PLUTO |
---|
Code: 010176 |
Compatible tools: RAF, PLUTO |
Description: Wall supports can be fixed to a vertical surface to easily store RAF and PLUTO tools with angle head when not in use. |
Model: Diametre adaptor |
---|
Code: 234545 |
Compatible tools: PLUTO |
Description: Reduction adaptor for PLUTO35 & 50CA drivers allowing interface with LINAR and CAR series arms |
Model: UR-Mount |
---|
Code: 010695/UR |
Compatible tools: PLUTO |
Description: Tool holder for PLUTO3, 6, 10 & 15CA and CA/FN2 series drivers. To be attached to Universal Robots® robotic arm. |
Model: Wall mount tilting bracket for KDU |
---|
Code: 010401 |
Compatible tools: KDU |
Description: Wall mount tilting bracket for KDU for wall or column use |
Model: Pivoting table stand for KDU |
---|
Code: 010402 |
Compatible tools: KDU |
Description: Pivoting table stand for KDU for table use, tiltable |
Model: 8.2 ft |
---|
Code: 200063 |
Compatible tools: FAB & RAF, KBL, NATO, MITO, PLUTO |
Description: Standard 5 pin cable − included with screwdriver |
Model: 8.2 ft |
---|
Code: 200063/H |
Compatible tools: FAB & RAF, KBL, NATO, MITO, PLUTO |
Description: 5 pin cable with strain relief − heavy duty applications |
Model: 16.4 ft |
---|
Code: 200563 |
Compatible tools: FAB & RAF, KBL, NATO, MITO, PLUTO |
Description: 5 pin cable, 16 ft length |
Model: 16.4 ft |
---|
Code: 200563/S |
Compatible tools: FAB & RAF, KBL, NATO, MITO, PLUTO |
Description: 5 pin spiral cable |
Model: 26.2 ft |
---|
Code: 200863 |
Compatible tools: FAB & RAF, KBL, NATO, MITO, PLUTO |
Description: 5 pin cable, 26 ft length |
Model: 8.2 ft |
---|
Code: 250063/N |
Compatible tools: KBL/S, PLUTO/TA, NATO/TA, MITO /TA |
Description: Standard 8 pin cable − included with screwdriver |
Model: 8.2 ft |
---|
Code: 250063/H |
Compatible tools: KBL/S, PLUTO/TA, NATO/TA, MITO /TA |
Description: 8 pin cable with strain relief − heavy duty applications |
Model: 16.4 ft |
---|
Code: 250563 |
Compatible tools: KBL/S, PLUTO/TA, NATO/TA, MITO /TA |
Description: 8 pin cable, 16 ft length |
Model: 16.4 ft |
---|
Code: 250563/S |
Compatible tools: KBL/S, PLUTO/TA, NATO/TA, MITO /TA |
Description: 8 pin spiral cable |
Model: Clutch cover for KBL04-15 |
---|
Code: 020028 |
Compatible tools: KBL |
Description: Model for KBL04FR and KBL15FR. It prevents the operator from accidentally altering the clutch adjustment. |
Model: Clutch cover for KBL30-40 |
---|
Code: 020029 |
Compatible tools: KBL |
Description: Model for KBL30FR and KBL40FR. It prevents the operator from accidentally altering the clutch adjustment. |
Model: Clutch cover for KBL04-15 CA |
---|
Code: 020028/CA |
Compatible tools: KBL |
Description: Model for KBL04FR/CA and KBL15FR/CA. It prevents the operator from accidentally altering the clutch adjustment. |
Model: Clutch cover for KBL30-40 CA |
---|
Code: 020029/CA |
Compatible tools: KBL |
Description: Model for KBL30FR/CA and KBL40FR/CA. It prevents the operator from accidentally altering the clutch adjustment. |
Model: RIV HD2 |
---|
Code: 010181 |
Compatible tools: KBL |
Description: 0.31 in hole. Model for KBL30FR and KBL04FR screwdrivers, also for models with signals (KBL FR/S) and autoreverse (KBL FR/AR). |
Model: RIV HD4 |
---|
Code: 010183 |
Compatible tools: KBL |
Description: 0.11 in hole. Model for KBL04FR and KBL15FR screwdrivers, also for models with signals (KBL FR/S) and autoreverse (KBL FR/AR). |
Model: RIV HD5 |
---|
Code: 010184 |
Compatible tools: KBL |
Description: 0.11 in hole. Model for KBL30FR and KBL04FR screwdrivers, also for models with signals (KBL FR/S) and autoreverse (KBL FR/AR). |
Model: RIV HD1 |
---|
Code: 010180 |
Compatible tools: PLUTO |
Description: 0.31 in hole. Model for PLUTO3D, PLUTO6D, PLUTO10D/N, PLUTO15D/N. |
Model: RIV HD3 |
---|
Code: 010182 |
Compatible tools: PLUTO |
Description: 0.11 in hole. The 0.11 in hole can be modified up to 0.4 in. Model for PLUTO3D, PLUTO6D, PLUTO10D/N, PLUTO15D/N. |
Model: 1/4" - 1/4" kit for 04-15 |
---|
Code: 800406 |
Compatible tools: KBL |
Description: 1/4" - 1/4" flange mount kit that turns KBL04 CA and KBL15 CA screwdrivers into KBL CA/FN. |
Model: 1/4" - 1/4" kit for 30-40 |
---|
Code: 800407 |
Compatible tools: KBL |
Description: 1/4" - 1/4" flange mount kit that turns KBL30 CA and KBL40 CA screwdrivers into KBL CA/FN. |
Model: 1/4" - 3/8" kit |
---|
Code: 800400 |
Compatible tools: PLUTO |
Description: An 1/4" - 3/8" flange mount kit turns a PLUTO (3, 6, 10 or 15) CA into PLUTO CA/FN2. |
Model: 3/8" - 3/8" kit |
---|
Code: 800401 |
Compatible tools: PLUTO |
Description: For PLUTO20. It turns a PLUTO20CA into PLUTO20CA/FN. |
Model: 3/8" - 3/8" kit |
---|
Code: 800403 |
Compatible tools: PLUTO |
Description: For PLUTO35. It turns a PLUTO35CA into PLUTO35CA/FN. |
Model: 1/2" - 1/2" |
---|
Code: 800319 |
Compatible tools: PLUTO |
Description: Model for PLUTO 50/FN. Max 442 in-lb. |
Model: 1/4" - 3/8" |
---|
Code: 800320 |
Compatible tools: PLUTO |
Description: Model for PLUTO CA/FN2. Max 133 in-lb. |
Model: 3/8" - 3/8" |
---|
Code: 800321 |
Compatible tools: PLUTO |
Description: Model for PLUTO20 and PLUTO35. Max 310 in-lb. |
Model: 1/4" - 1/4" |
---|
Code: 800322 |
Compatible tools: KBL, MITO |
Description: Model for PLUTO FR/FN and MITO /FN. Max 62 in-lb. |
Model: A2 Drawings |
---|
Code: 010111/1 |
Compatible tools: KBL, NATO, MITO, PLUTO |
Description: For non-magnetic M2-M2.6 screws. It can be installed on any screwdriver. |
Model: A3 |
---|
Code: 010111/2 |
Compatible tools: KBL, NATO, MITO, PLUTO |
Description: For non-magnetic M3-M4 screws. It can be installed on any screwdriver. |
Model: ASP HD6 |
---|
Code: 010117 |
Compatible tools: NATO, MITO |
Description: Rubber pad output. Best suited for round-headed screws. Model specifically designed for NATO15. |
Model: ASP HD6/UNI |
---|
Code: 010117/UNI |
Compatible tools: NATO, MITO |
Description: Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for NATO15. |
Model: ASP HD7 |
---|
Code: 010118 |
Compatible tools: NATO, MITO |
Description: Rubber pad output. Best suited for round-headed screws. Model specifically designed for NATO50. |
Model: ASP HD7/UNI |
---|
Code: 010118/UNI |
Compatible tools: NATO, MITO |
Description: Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for NATO50. |
Model: ASP HD8 |
---|
Code: 010119 |
Compatible tools: NATO, MITO |
Description: Rubber pad output. Best suited for round-headed screws. Model specifically designed for MITO15. |
Model: ASP HD8/UNI |
---|
Code: 010119/UNI |
Compatible tools: NATO, MITO |
Description: Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for MITO15. |
Model: ASP HD9 |
---|
Code: 010121 |
Compatible tools: PLUTO |
Description: Rubber pad output. Best suited for round-headed screws. Model specifically designed for PLUTO3, PLUTO6, PLUTO10 and PLUTO15. |
Model: ASP HD9/UNI |
---|
Code: 010121/UNI |
Compatible tools: PLUTO |
Description: Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for PLUTO3, PLUTO6, PLUTO10 and PLUTO15. |
Model: ASP HD10 |
---|
Code: 010122 |
Compatible tools: KBL |
Description: Rubber pad output. Best suited for round-headed screws. Model specifically designed for KBL04 and KBL15. |
Model: ASP HD10/UNI |
---|
Code: 010122/UNI |
Compatible tools: KBL |
Description: Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for KBL04 and KBL15. |
Model: ASP HD11 |
---|
Code: 010123 |
Compatible tools: KBL |
Description: Rubber pad output. Best suited for round-headed screws. Model specifically designed for KBL30 and KBL40. |
Model: ASP HD11/UNI |
---|
Code: 010123/UNI |
Compatible tools: KBL |
Description: Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for KBL30 and KBL40. |
Model: AC 2.3 |
---|
Code: 010113 |
Compatible tools: KBL, NATO, MITO, PLUTO |
Description: For M2-M3 screws. Easily picks up non-magnetic screws with a small plastic clamp. |
Model: AC 3.5 |
---|
Code: 010114 |
Compatible tools: KBL, NATO, MITO, PLUTO |
Description: For M3-M5 screws. Easily picks up non-magnetic screws with a small plastic clamp. |
Model: DOCK 01 Drawings |
---|
Code: 020020 |
Compatible tools: EDU1FR |
Description: Dual output connector for EDU1FR controllers. Run two drivers with one controller. Drivers cannot be used at the same time. |
Model: DOCK 02 Drawings |
---|
Code: 020035 |
Compatible tools: EDU1BL |
Description: Dual output connector for EDU1BL controllers. Run two drivers with one controller. Both drivers can be used at the same time. |
Model: DOCK 02/S Drawings |
---|
Code: 020035/S |
Compatible tools: EDU1BL/SG |
Description: Dual output connector for EDU1BL/SG controllers. Run two drivers with one controller. Drivers cannot be used at the same time. |
Model: DOCK 04 Drawings Drawings |
---|
Code: 020045 |
Compatible tools: EDU2AE/TOP |
Description: Dual output connector for PLUTO Series, to be used with EDU2AE/TOP. Run two drivers with one controller (not simultaneously). |
Model: DOCK 04/TA/N |
---|
Code: 020045/TA/N |
Compatible tools: EDU2AE/TOP/TA |
Description: Dual output connector for PLUTO TA Series, to be used with EDU2AE/TOP/TA. Run two drivers with one controller (not simultaneously). |
Model: DOCK 05 |
---|
Code: 020046 |
Compatible tools: KDU |
Description: Dual output connector for KDS screwdrivers, to be used with KDU units. Run two drivers with one controller (not simultaneously). |
Model: ACE Drawings |
---|
Code: 020021 |
Compatible tools: EDU1FR/SG, EDU1BL/SG |
Description: Screw counting device for EDU1FR/SG controller. It keeps track of either correct and wrong tightenings, as well as cycles and sequences. |
Model: Ethernet device Drawings Drawings |
---|
Code: 020075 |
Compatible tools: EDU2AE/TOP, EDU2AE/TOP/E o EDU2AE/TOP/TA (multitorque controllers) |
Description: Connect your PC to any EDU2AE/TOP, EDU2AE/TOP/E or EDU2AE/TOP/TA via remote LAN connection using an ethernet device. |
Model: UR® Robot connection device |
---|
Code: 020077 |
Compatible tools: EDU2AE/TOP, EDU2AE/TOP/E o EDU2AE/TOP/TA (multitorque controllers) |
Description: Plug-in device for connecting UR® Robot and EDU2AE/TOP, EDU2AE/TOP/E or EDU2AE/TOP/TA controllers. |
Model: UR® Robot connection device |
---|
Code: 020078 |
Compatible tools: KDU |
Description: Plug-in device for connecting UR® Robot and KDU controllers. |
Model: 2D Barcode reader |
---|
Code: 020051 |
Compatible tools: KDU |
Description: KDU units can also be controlled via a barcode reader. Scan the right barcode (either 1D or 2D, such as QR codes) to select the correct program. |
Model: Adaptor kit SW CBS |
---|
Code: 010410 |
Compatible tools: KDU |
Description: Adaptor device for connecting KDU-1A and SWBX88 switchbox or CBS880 socket tray. |
Model: Programming device KDU |
---|
Code: 010420 |
Compatible tools: KDU |
Description: Programming device for firmware updates on KDU-1A control units. Cable code no. 872538 included. |
Model: Cable for PICkit4 |
---|
Code: 872538 |
Compatible tools: KDU |
Description: Interface cable between PICkit4 programming device and KDU-1A control unit. |
Model: SWBX88 Switchbox Drawings |
---|
Code: 020033 |
Compatible tools: EDU2AE/TOP, EDU2AE/TOP/E o EDU2AE/TOP/TA (multitorque controllers) |
Description: Select the right pre-set program by simply pushing a button. 8-program selection. |
Model: CBS880 Socket tray |
---|
Code: 020042 |
Compatible tools: EDU2AE/TOP, EDU2AE/TOP/E o EDU2AE/TOP/TA (multitorque controllers) |
Description: When a bit or socket is removed from the tray, the control unit automatically selects the pre-set program. 8-program selection. |
Model: BRCR90 Barcode reader |
---|
Code: 020050 |
Compatible tools: EDU2AE/TOP, EDU2AE/TOP/E o EDU2AE/TOP/TA (multitorque controllers) |
Description: Multiprogram units can also be controlled via a barcode scanner. Scan the right barcode to select the correct pre-set program. |
Model: Start / Reverse pedals |
---|
Code: 020070 |
Compatible tools: EDU2AE |
Description: Start and reverse signals can be activated using a foot pedal. Supplied standard with 11 ft cable and connector for any EDU2AE controller. |
Model: PRNTR1 Serial printer |
---|
Code: 020026 |
Compatible tools: K, Mini K Torque testers |
Description: Instantly print each screw tightening result via a serial printer. It connects directly to multiprogram units and K and Mini K/S torque testers. |
Model: Light tower stack |
---|
Code: 020080 |
Compatible tools: EDU2AE |
Description: A light stack makes output signals clearly visible. Supplied standard with 8 ft cable and 10 pin connector for EDU2AE series. |
Model: Light tower stack |
---|
Code: 020081 |
Compatible tools: EDU2AE/TOP, EDU2AE/TOP/TA |
Description: A light stack makes output signals clearly visible. Supplied standard with 8 ft cable and 10 pin connector for EDU2AE/TOP and TOP/TA. |
Model: Light tower stack |
---|
Code: 020083 |
Compatible tools: KDU |
Description: A light stack makes output signals clearly visible. Supplied standard with a 8 ft cable and 10 pin connector for KDU. |